Commercial Diving Gear & Equipments

SAFE HARNESS NORTHERN DIVER

With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.

The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

BATICOROMETER - STANDARD KIT

ARNÉS SEGURIDAD MK5

The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures. With 6 pockets to each accommodate 8 pounds of lead, and the ability to quickly release them.

PANEL CONTROL III 3 DIVERS

The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.

BATICOROMETER - COMPLETE KIT (With Calibration)

BATICORROMETER - BASIC KIT

BathyCorrometers are used for polarization, corrosion and interaction studies, as part of their inspection control of production and drilling platforms; submarine gas pipelines; ship hulls; breakwaters and other maritime structures.

PANEL CONTROL I (2 Wires)

The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

MULTIGAUGE 3000 ULTRASONIC DENSITY INDICATOR +...

The MULTIGAUGE 3000 Submarino indicator is a density measuring device designed for use by a diver, for the most common applications such as density measurement underwater. This is a simple and robust manual indicator, which uses multiple echo waves, ignoring coatings and only measuring the thickness of the remaining metal

DEPRESSION INDICATOR

ROV ADAPTER PROBE

ROV probe adapter

MARK IV JUMP JACKET HARNESS-BCD

Compensation harness-vest Mark IV Jump Jucket that allows the rapid recovery of the injured person thanks to the integrated lifting harness and supplying gas if necessary.

KMACS 5 NO COMMUNICATIONS

KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.

CYGNUS UNDERWATER

Cygnus' original diver-held subsea multiple-echo ultrasonic thickness meter, designed for use by divers undertaking subsea maintenance and surveys 3 decades ago… and today it is still an industry standard

PANEL GAS KMACS5

The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.

MK2 SAFE BOOTS

Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.

CYGNUS DIVE UNDERWATER

Providing an invaluable free hand while performing underwater ultrasonic thickness measurement, the Cygnus DIVE is a robust, wrist-mountable ultrasonic underwater thickness meter with a large, bright display with live A-scan making it easily viewable by both the diver and camera - even in the poorest visibility.

HSE PANEL 2 DIVERS (PORTABLE/FRAME MOUNTED), NO...

Synergy HSE two-diver inshore panels are built specifically for non-imca shore diving operations. Each diver has 1 independent HP supply line and 1 independent LP supply line per diver. Inlet and outlet fittings can be provided from the side, top or bottom of the panel. We can supply as a portable panel or mounted on a frame for permanent installation.

DUSKY LASER

The Dusky Shark T2 Subsea Line Laser is used when measurements are needed from video images.

SRP PANEL 3 DIVERS IMCA

The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.

SRP 2 DIVERS PANEL IMCA

Synergy designed diving SRP's are one of our popular products and have been very well received in the diving industry. Manufactured with a stainless steel frame, 4 x 50 ltr x 200 bar lightweight carbon composite cylinders, all connected to an air management panel and the two diver panels for diver air supply and cylinder charging.

TWO DIVERS PORTABLE PANEL